Mobile Ignition Wire Set Replacement At Home Or Office

If Your Spark Plug Wires Have Been In Use For A While, They Can Develop Resistance, Hindering The Efficient Transfer Of Electric Pulses. This Resistance Often Arises From Contact Corrosion Or Deterioration Of The Insulated Coating On The Wires. Cracks Or Tears In The Insulation Can Lead To Electric Pulses Arcing To Other Engine Parts, Resulting In Misfires. Additionally, Corroded Terminals Can Cause A Loss Of Electrical Power, Leading To Incomplete Combustion Of The Fuel-Air Mix In The Cylinder. Incomplete Combustion Can Manifest As Engine Misfires, Rough Idling, Power Loss, Or Even Emission Issues, Potentially Causing Your Vehicle To Fail Inspections. Misfires Or Emission Problems May Also Trigger The Check Engine Light. If You're Unsure About What To Do, My Mechanic Malaysia Mobile Mechanics Offer Towing And Roadside Assistance To Ensure You're Not Stranded. {/*

With My Mechanic Malaysia, there’s no need to visit a workshop. Our expert mobile mechanics come directly to your home, office, or preferred location with professional tools and knowledge to replace your backing plates safely and efficiently.

*/}

How Is Ignition Wire Set Replacement Done?

1. Allow The Engine To Cool For 3 To 4 Hours Before Replacing The Spark Plugs.
2. If Reusing The Original Wire Set, Label Each Spark Plug Wire With Masking Tape And A Marker.
3. Remove Each Spark Plug Wire By Gently Pulling The Boots To Prevent Damage.
4. Consult Your Vehicle Repair Guide For The Necessary Socket Size And Spark Plug Gap Specifications.
5. Use A Spark Plug Gapping Gauge To Set The Correct Gap On The New Plugs.
6. Ensure To Use A Spark Plug Socket With An Internal Gasket.
7. Inspect The Removed Spark Plugs For Any Mechanical Issues.
8. Apply Anti-Seize Lubricant On The Spark Plug Threads If Your Engine Has An Aluminum Cylinder Head.
9. Use A Torque My Mechanic Malaysia To Install The New Spark Plugs As Per The Repair Guide's Specifications.
10. If Replacing Spark Plug Wires, Refer To The Vehicle Repair Guide For A Wiring Diagram.
11. Apply Dielectric Grease Inside Each Spark Plug Wire Boot To Facilitate Future Removal.
12. Connect The Spark Plug Wire Boots To Complete The Replacement Process.

Frequently Asked Questions